Blog · Category
Installation & maintenance
Flush-to-floor shower gradient and drain: installation guide
Flush-to-floor shower gradient and drain: correct falls, linear drain or point waste, screed depth and the standards to check before ordering the tray.
Read →
Shower enclosure spare parts: seals, hinges and rollers
Worn seals, loose hinges or noisy rollers? How to find the right shower enclosure spare parts, check compatibility and get your shower working again.
Read →
Shower enclosure silicone sealant: how to choose it, apply it and when to replace it
Shower enclosure silicone sealant goes unnoticed until it fails. Acetic, neutral, anti-mould or hybrid, each type suits a different job. Applying it well takes only a few steps, but the wrong ones, like sealing over the old bead, ruin the result in weeks. Here is how to choose, apply and know when to replace it.
Read →
Waterproofing a Walk-In Shower: A Guide to Products and Techniques
A walk-in shower has no doors or retaining profiles, which makes it beautiful to look at. But it also means water moves far more freely than in a traditional enclosed shower. That is why waterproofing has to be planned with extra care: treating the tray is not enough, you need to cover at least 180-200 cm of wall and seal every critical point. Read the guide!
Read →
Overlaying a Shower Tray: Renovate Your Bathroom Without Tearing Up the Floor
Refreshing your shower without opening up the floor is possible: shower tray overlaying means fitting a new tray straight over the existing one, linked to the waste with a connector. The job is done in half a day, costs less than a traditional replacement and, with the right materials, lasts as long as a brand-new installation.
Read →
Replacing a Bath with a Shower Without Removing Tiles: Cladding Panel Solutions
Swapping a bath for a shower no longer means tearing out your tiles. Waterproof cladding panels bond straight onto existing surfaces, while cut-to-size resin shower trays adapt to any space. Compared with a full renovation, the job takes just 1–2 days and costs 30–50% less, leaving you a modern, more accessible bathroom that is far easier to clean.
Read →
Yellowed shower tray: causes, remedies and a DIY restoration kit
A shower tray can yellow from limescale build-up, harsh cleaners that damage the protective layer, or UV light and chemical reactions on ABS and acrylic. Surface marks often lift with bicarbonate, citric acid or vinegar (ceramic only); deeper staining needs professional descalers or high-volume hydrogen peroxide. When cleaning is not enough, a DIY kit rebuilds a fresh protective coat. Drying after every use is the best prevention.
Read →
Shower Door Seals: How to Stop Leaks and Refresh Your Bathroom
Shower door seals are essential for stopping leaks, but moisture, limescale and harsh chemicals wear them down over time. There are several types, the right choice depends on glass thickness and the gap to be sealed, and replacing them is a simple job once you measure accurately and clean the glass thoroughly.
Read →
Shower Enclosure Runners: The Key to Smooth Sliding and Lasting Performance
Shower enclosure runners are what make a sliding door glide smoothly and last for years. At CSA Box Doccia the focus is on quality materials — stainless steel and anodised aluminium — and features such as top-hung sliding and quick-release for easy cleaning. Regular maintenance keeps limescale and worn rollers at bay. Choose quality runners and you secure the function, looks and longevity of your enclosure.
Read →
How to Seal a Shower Enclosure (Without Losing Your Mind)
Sealing a shower enclosure is a DIY job almost anyone can manage with the right tools and a mould-resistant, neutral-cure silicone. Here are the six key steps, where to seal (usually inside), and the common mistakes to avoid.
Read →
How to Clean a Shower Enclosure: 3 Foolproof Lifehacks for Streak-Free Glass
Tired of limescale, streaks and mould? Learn how to clean a shower enclosure the easy way with three simple, professional tricks, natural remedies and a weekly routine that keeps the glass clear and hygienic.
Read →
Frameless Shower Enclosure Maintenance: Handy Tips and Limescale Treatments
Clean regularly with a dedicated cleaner and dry after every use to keep limescale and grime at bay. Keep seals in good shape and add CSA's anti-limescale treatment to prevent leaks and make cleaning easier, while quick-release sliding doors make a deeper clean simple.
Read →
Complete Guide to Fitting a Shower Enclosure: Who to Call, Costs and Useful Tips from the Best Manufacturers in Italy
Call a specialist manufacturer like CSA for a professional, guaranteed fit. Costs and installation times vary, so ask for a personalised quote. Choose a reliable manufacturer for the highest quality and full customisation of your shower enclosure.
Read →